Yield Questions can be directed to: 281-297-8500 Drilling Products Technical Marketing (3) This spreadsheet will calculate performance for non-standard tool joint material yield strengths which may not be acceptable/applicable to some or all applications. (2) The make-up torque of a tool joint is based on the lower of 60% of the tool joint torsional yield strength or the T3 value calculated per the equation in paragraph A.8.3 of API RP7G. Notes: (1) Torsional yield strength of double-shoulder tool joints (HT, XT, GPDS) is calculated per a modified form of the equation described in paragraph A.8.1 of API RP7G that takes into consideration the contributions of the secondary shoulder.lbsft-lbsft-lbsAb/Ap = Make-up TorqueTensile StrengthTorsional StrengthPerformance Statisticspsiin.IDODTypeConnection Properties 2-3/8 OH 2-3/8 SLH90 2-3/8 WO 2-7/8 HTPAC 2-7/8 OH 2-7/8 PAC 2-7/8 SLH90 3-1/2 SLH90 4 H90 4 SH 4-1/2 FH 4-1/2 H90 4-1/2 OH 5-1/2 FH 6-5/8 FH GPDS26 GPDS31 GPDS38 GPDS40 GPDS46 GPDS50 GPDS55 GPDS65 2-3/8 HT SLH-90 2-7/8 HTOH 2-7/8 HTPAC HT26 HT31 HT38 HT40 HT46 HT50 HT55 HT65 NC26 NC31 NC38 NC38 NC40 NC46 NC50 XT24 XT26 XT29 XT30 XT31 XT34 XT38 XT39 XT40 XT43 XT46 XT50 XT53 XT54 XT55 XT57 XT61 XT65 XT69 XT-M24 XT-M26 XT-M29 XT-M31 XT-M34 XT-M38 XT-M39 XT-M40 XT-M43 XT-M46 XT-M50 XT-M54 XT-M57 XT-M61 XT-M65 XT-M69 in. While every effort has been made to ensure the accuracy of the data herein, this material is presented as a reference guide only and should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this program. No expressed or implied warranty is intended.